PHASA IV30/30 Machine                                                

 

 

 

 

 

Phasa 10/30
Phasa 20/40
Phasa 20/40E
Phasa 40/40
Phasa IV30/30
Phasa 40/80
Phasa 40 80R
Phasa Automation
Phasa Point

 

 

 

 

The IV30/30 machine provides support and location to the "B" face while processing, minimising any risk of damage on the "A" face - particularly important where painted or other suseptible surfaces are employed.

 

A dedicated product machine, free standing with lightguard protection it ensures that this design with its top loading is very user friendly in operation.

 

The machine will process all common thermoplastics - with or without filling materials.

 

General Construction

Welded steel box section frame, cast ground machine base - mounting plates.
Electrical System 3∅ 415V. 50/60 Hz –providing 24V d.c. control supply.
Electrical Protection Via RCCB and MCB overload trips.
Pneumatic System SMC valves and air cylinders with Origa rodless index cylinder.
Temperature Control Omron E5C3 Temperature control - sensing through 'K' thermocouples.
Heating System 2 x 3,000W. energized by 28amp SSR, pulsed through Temperature Controller.
Process Control Siemens.
Operator Interface Siemens.

Guard System Light Guard operator loading bay protection & total enclosure of process cell.
Documentation Comprehensive instruction and maintenance manual
Standard Processing Area 300 x 300 x 75mm deep
Maximum Number of Fixing Points 30 positions
Nominal Cycle Time 20 seconds
Basic Tool Change Time 15 minutes
Nett Weight (excluding tooling) 1,000 kg
Size 1200mm x 1300mm x 2015mm high.
Air (subject to product & output) 8 cfm (4 dm3/s) @ 5.5 bar
Electricity 2 x 3,000 watt @ 240 V a.c.